hello all,
How to calculate the blower CFM required to remove the vapors from the tank and feed to scrubber???
HCL tank volume is 52m3, temperature is 45 degrees, conc 33%
i have calculated the vapor flow - 20 NM3/Hr
|
Posted 29 May 2018 - 09:29 AM
hello all,
How to calculate the blower CFM required to remove the vapors from the tank and feed to scrubber???
HCL tank volume is 52m3, temperature is 45 degrees, conc 33%
i have calculated the vapor flow - 20 NM3/Hr
Posted 29 May 2018 - 05:33 PM
Hi ,
Only you knows how you calculate the flow rate expressed in Nm3/h . Define The Normal condition and do the necessary conversion to calculate the flow rate expressed either as ACFM or SCFM , CFM stands for cubic foot per minute .
A stands for actual ( temperature and Pressure at suction) , For S it stands for standard condition , you also need to define the conditions.
Note : You will find some explanation about my comments above in the pamphlet attached.
Good luck
Breizh
Edited by breizh, 30 May 2018 - 05:09 AM.
Chemical Solution For A Low Abatement ScrubberStarted by Guest_Pheeto_* , 16 Jan 2024 |
|
|
||
Scrubber Fan SizingStarted by Guest_ksagarzazu_* , 06 Jan 2024 |
|
|
||
Type Of Scrubber Needed To Remove Hcl Venturi Or Packed Bed ?Started by Guest_pckr9386_* , 13 Oct 2023 |
|
|
||
Compressor/blower Name TagStarted by Guest_Chemom_* , 03 Sep 2023 |
|
|
||
Wet Scrubber Design For Low Flow Rate Of GasStarted by Guest_SIVAMOORTHY_* , 17 Apr 2018 |
|
|