I have a question regarding selection of nozzle type for a pressure vessel. I have seen lots of nozzle type can be used for vessel and type of nozzles are given below for your reference:
1. Set in nozzle with pad
2. Set in nozzle without pad
3. Set on nozzle with pad
4. Set on nozzle without pad
5. Self-reinforcing nozzle
Grateful, if someone would give some guideline regarding selection of nozzle as per code.
Also I would like to know that whether calculation for nozzle has to be checked and passed as per UG-37 and appendix 1-10" of ASME Section VIII, Div 1 or only one calculation is sufficient.