Hi,
Is there any way to estimate particle size distribution of a particular biomass using a particular grinding machine?
|
Posted 16 October 2020 - 08:53 AM
Hi,
Is there any way to estimate particle size distribution of a particular biomass using a particular grinding machine?
Posted 18 October 2020 - 12:18 AM
Hi,
I don't understand your query . Each equipment will provide a specific PSD .
To me the only way is to perform test with equipment and then adjust the parameters to match your specification .
Probably good to check in Chemical engineering handbook i.e Perry
note : Let you try to get a copy of the following article
The laws Governing the fineness of powdered coal by Prof .Dr .P .Rosin and Dr E.Rammler , Berlin Germany .
Good luck
Breizh
Edited by breizh, 18 October 2020 - 01:42 AM.
Posted 20 October 2020 - 04:27 AM
Many thanks Breizh
Firewater Theoretical Vs Actual FlowStarted by Guest_stu_* , 25 Feb 2024 |
|
|
||
Is There Any Rule Of Thumb For Estimation Of Steam Generation From FirStarted by Guest_AnbIran_* , 20 Nov 2023 |
|
|
||
Flare Back Pressure Estimation At Basic DesignStarted by Guest_Mahdi Malek Alaie_* , 10 Apr 2023 |
|
|
||
Estimation Of Properties For Soapy WaterStarted by Guest_panagiotis_* , 06 Oct 2022 |
|
|
||
Estimation Of Performance CurveStarted by Guest_panagiotis_* , 28 Apr 2022 |
|
|