Dear All
Why stack emissions being reported on dry basis ? Wet basis gives the actual concentration inside the stack and lower than dry basis concentration
|
Posted 16 June 2021 - 09:51 AM
Dear All
Why stack emissions being reported on dry basis ? Wet basis gives the actual concentration inside the stack and lower than dry basis concentration
Posted 16 June 2021 - 10:14 AM
My guess is no one cares how much water is emitted, so report the pollutants on a dry basis.
Posted 16 June 2021 - 01:25 PM
Dear Latexman
When reporting in wet basis, the ppm levels inside stack is lower , hence when emitted to atmosphere still on volumetric basis meets environmental regulations, unless the moisture condenses outside the stack and emitted gases polluting environment.
Is that right ?
Gas Seal In Hydrogen Vent StackStarted by Guest_Afshin445_* , 27 Dec 2023 |
|
|
||
Controlled Type Blowdown Through Vent Stack, Reach Mach 1Started by Guest_x127127@hotmail.com_* , 16 Dec 2017 |
|
|
||
Solvent Carryover Emissions In Absorption ProcessStarted by Guest_TeeEng_* , 24 Oct 2023 |
|
|
||
Flue Gas Stack ModelingStarted by Guest_Maryam sheikhmohamad_* , 28 May 2023 |
|
|
||
Nitrogen Purge On Flare StackStarted by Guest_sanderson51_* , 08 May 2023 |
|
|