Pingpong, silesar, silvershaded and other generous contributors, for a conceptual design/estimate, sizing of an ATR(oxygen-blown autothermal reformer) vessel (operated at high pressure close to 40-50 bara) wanted to know is there is any industrial thumbrukle to estimating the catalyst volume an dreactor volume of the ATR vessel, using say the Normal flow rae of the reacting gas mixture(incling NG feed and oxygen) or any such formula. This is needed to guesstimate costs of the ATR vessel. Suppose I have say 1000 Normal m3 of NG+oxygen at ATR inlet at a pressure of 45 bara and with typical exit temperatures(approx. 1000C), are there any heuristics-based thumbrules to quickly size the ATR pressure vessel?
|
0
Typical Design Parameters For Atr Sizing- Help Needed
Started by daraj, Jan 28 2023 06:59 AM
2 replies to this topic
Share this topic:
Similar Topics
Flash Steam Vessel SizingStarted by Guest_JohnFields343_* , Yesterday, 12:03 PM |
|
|
||
Design And Fabrication Of Reflux DrumStarted by Guest_Femi_* , 22 Apr 2024 |
|
|
||
Jt Based Hcdp Design V/s Mechanical Refrigeration Hcdp Unit.Started by Guest_BabRafiq1_* , 19 Apr 2024 |
|
|
||
Rupture Disc DesignStarted by Guest_chaupradip_* , 13 Apr 2024 |
|
|
||
Pump Sizing ConsiderationsStarted by Guest_panagiotis_* , 07 Apr 2024 |
|
|