Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

Nitrogen Compression


This topic has been archived. This means that you cannot reply to this topic.
No replies to this topic
Share this topic:
| More

#1 Chris Haslego

Chris Haslego

    Administrator

  • Admin
  • 191 posts

Posted 08 April 2003 - 06:32 PM

-------------Original Message--------------
I am attempting to understand the heat generation problem during the compression of nitrogen. Is this problem attributable to the heat capacity ratio (1.4) of nitrogen? (If so, how does the heat capacity ratio increase with increasing pressure?)


--------------Response----------------------

The compression of any gas results in raising the temperature of the gas ... this is not unique to nitrogen. The adiabatic compression of a gas follows this equation:

T2 / T1 = (P2 / P1) (k -1) / k

where: k = the heat capacity ratio

I would also point out that many gases have a heat capacity ratio
in the range of 1.3 to 1.4 ... again this is not unique to nitrogen.

Hope this helps,

Milton Beychok
(Visit me at www.air-dispersion.com)




Similar Topics