For PRO-II / Provision simulator i would like to know if the following is possible -
1) Stream 1 is generated within the simulation in a recycle loop.
2) Stream 2 is a stream with fixed composition
2) I require to impose composition of stream 2 on stream 1 keeping the flow-rate and pressure temperature conditions of stream 1 only and continue the recycle loop.
the above manipulation is being carried out across a reactor system so that the licensor reactor module simulation can be bypassed and downstream seperation units can be run independent of the licansor simulation.
regards
abhishek
|
Stream Manipulation In Pro-ii
Started by abhi_sim, Nov 26 2007 11:46 AM
1 reply to this topic
Share this topic:
#1
Posted 26 November 2007 - 11:46 AM
#2
Posted 27 November 2007 - 01:47 AM
QUOTE (abhi_sim @ Nov 26 2007, 11:46 AM) <{POST_SNAPBACK}>
For PRO-II / Provision simulator i would like to know if the following is possible -
1) Stream 1 is generated within the simulation in a recycle loop.
2) Stream 2 is a stream with fixed composition
2) I require to impose composition of stream 2 on stream 1 keeping the flow-rate and pressure temperature conditions of stream 1 only and continue the recycle loop.
the above manipulation is being carried out across a reactor system so that the licensor reactor module simulation can be bypassed and downstream seperation units can be run independent of the licansor simulation.
regards
abhishek
1) Stream 1 is generated within the simulation in a recycle loop.
2) Stream 2 is a stream with fixed composition
2) I require to impose composition of stream 2 on stream 1 keeping the flow-rate and pressure temperature conditions of stream 1 only and continue the recycle loop.
the above manipulation is being carried out across a reactor system so that the licensor reactor module simulation can be bypassed and downstream seperation units can be run independent of the licansor simulation.
regards
abhishek
yes u can through the window of the stream compostion of 1 use refrence stream 2 and then use some sort of splitter or mixer to adjust the flow and the temp with pres could be independet
Similar Topics
How Calculate Amount Of Water For A Water Saturated Hydrocarbon StreamStarted by Guest_AnbIran_* , 04 Oct 2023 |
|
|
||
Washwater Injection To Hydrocarbon Stream At High Temperature And PresStarted by Guest_Venkat @89_* , 17 Sep 2023 |
|
|
||
Understanding Flow Stream Fractions In The Shell Side Of The Heat ExchStarted by Guest_IonCube_* , 24 Jun 2023 |
|
|
||
Impact Of Ambient Temperature And Solar Radiation To A Gas StreamStarted by Guest_Jon K_* , 06 Apr 2023 |
|
|
||
Solid Entrainment In Vapor StreamStarted by Guest_Leotop_* , 16 Feb 2023 |
|
|