Hi all,
Quick question, I cannot seem to be able to define the units for the flowrate of my streams. Currently, when I double-click on a stream and go to Flowrate and Composition, the flowrate's units are kg-mol/hr. I would like this to change to be m3/hr as this is what my plant data is in. Is there a way I can define a stream's composition on a molar % basis and then still have the overall flowrate in m3/hr? I cannot seem to find out where to change it!
Thanks and regards,
Tom Pritchard
|
Pro Ii Flowrate Unit Definition
Started by , Jan 17 2008 04:59 AM
2 replies to this topic
Share this topic:
#1
Posted 17 January 2008 - 04:59 AM
#2
Posted 17 January 2008 - 06:34 AM
Schismatic,
Put cursor in the flowrate block and then click on 'UOM' button in the menu bar.
You will be able to change the appropriate units as per yr requirement.
The same change can be done in individual component's column also.
Regards
Shreyas
Put cursor in the flowrate block and then click on 'UOM' button in the menu bar.
You will be able to change the appropriate units as per yr requirement.
The same change can be done in individual component's column also.
Regards
Shreyas
#3
Posted 17 January 2008 - 11:09 AM
Hi Schismatic,
Under input button in the toolbar, click on units of measure, there you can define the input units.
Hope this helps,
Laobill
Under input button in the toolbar, click on units of measure, there you can define the input units.
Hope this helps,
Laobill
Similar Topics
Hydrocarbon Dew Point Control UnitStarted by Guest_BabRafiq1_* , 05 Apr 2024 |
|
|
||
Need Help In Calculating Ammonia Slip In Scr Unit.Started by Guest_Redbull010203_* , 11 Mar 2024 |
|
|
||
Oil Production And Desalting UnitStarted by Guest_Ali4269278331_* , 25 Feb 2024 |
|
|
||
Design Of A Psa Unit For Undergraduate Design ProjectStarted by Guest_LMorgan14_* , 04 May 2021 |
|
|
||
Air-Cooler Heat Exchanger - Unit Vs BayStarted by Guest_pymorty_* , 19 Dec 2023 |
|
|