hi,
This is my first post to the forum , excuse me for anything not clear...
I am doing the settle-out calculation for compressor system and calculated the volume of all the piping and equipment except compressor. Can anybody help me out to tell me how to calculate the volume of the compressor?
|
Compressor Volume
Started by Guest_distill_*, Jan 31 2008 08:55 PM
2 replies to this topic
Share this topic:
#1 Guest_distill_*
Posted 31 January 2008 - 08:55 PM
#2
Posted 01 February 2008 - 12:51 AM
I think this data shall be raised by vendor in compressor data sheet.
Regards
Regards
#3
Posted 01 February 2008 - 01:31 PM
QUOTE (fallah @ Feb 1 2008, 01:51 AM) <{POST_SNAPBACK}>
I think this data shall be raised by vendor in compressor data sheet.
Regards
Regards
You may consider to discuss with your mechanical engineer so that he/she can roughly make a preliminary selection and then obtain a volume from similar compressor. Then you reconfirm in later stage once vendor advise you...This will not stop you from progress...
Previous experiences (limited) shown that compressor volume don't give much impact to the settle-out pressure.
Similar Topics
Co2 Removal Membranes Between Compressor StagesStarted by Guest_Sinclc_* , 26 Mar 2024 |
|
|
||
Answered
Centrifugal Compressor Performance Curves In Aspen HysesStarted by Guest_Rafcio_* , 14 Mar 2024 |
|
|
||
Design Gauge Pressure Inlet To A Centrifugal Compressor.Started by Guest_Mohammad3799_* , 03 Mar 2024 |
|
|
||
Gas CompressorStarted by Guest_Md Ziaul Islam_* , 23 Jan 2024 |
|
|
||
Settle Out Pressure For Reciprocating CompressorStarted by Guest_prashant.badgujar_* , 03 Jan 2024 |
|
|