|
Who Know A Company Which Specializes In Heat Exchangers Thermal Design
#1
Posted 30 June 2009 - 08:31 AM
We are looking after a reliable company which could subcontract our heat exchangers thermo-hydraulic designs.
Could someone help us?
Thanks in advance.
#2
Posted 30 June 2009 - 08:47 AM
We are used to work with LM Ingénierie to perform our STHE designs. We work with them since many years and we never had any problem. Their team is very skilled and experienced. I can advise you to work with them unreservedly.
Their website : http://www.lm-ingenierie.fr.tc
#3
Posted 02 July 2009 - 03:14 AM
Thank you Casimir. I visited LMI website and their services seem to match our needs. We are going to contact them today.
Gregory, at the moment, we need only themal design and vibration analysis of STHE.
Does anyone know other companies conducting thermal design of STHE?
Best regards,
Kaodan.
#4
Posted 02 July 2009 - 05:06 AM
Hello Kaodan,
You may refer to the website www.aproctek.com for thermal design and vibration analysis of shell & tube heat exchangers. Besides the quality, it should be economical too.
#5
Posted 06 July 2009 - 03:23 AM
Thank you Rajesh.
The company you advise to us is very interesting, but does not seem to be a specialist in thermo-hydraulic design of heat exchangers, neither HTRI member which is very important for us.
Best regards,
Kaodan.
#6
Posted 16 July 2009 - 11:23 PM
Please have a look at our website.
www.specdynamics.com
#7
Posted 23 July 2009 - 03:02 AM
I am doing heat exchanger thermal design using HTRI software since long.
Please visit www.harshproject.com for additional information.
Or send enquiry to info@harshproject.com
With best regards
Dipen Shah
#8
Posted 03 August 2009 - 07:14 AM
Hi Dipen,
Thank you for your reply.
Kaodan
#9
Posted 06 August 2009 - 03:55 AM
We are looking after a reliable company which could subcontract our heat exchangers thermo-hydraulic designs.
Could someone help us?
Thanks in advance.
We at Ingenero Technologies (I) Pvt. Ltd. have been doing thermal design of all types of tubular heat exchangers. We have done design of heat exchangers with and without phase change i.e. sensible heat transfer applications, reboilers and condensers. We have designed heat exchangers for refinery, petrochemical and fine chemicals applications using HTRI and HTFS as per clients requirement.
Please visit www.ingenero.com
or mail me for further details on ssawant@ingenero.com
#10
Posted 20 November 2009 - 03:31 PM
I am application engineer working at TEi-SW (www.teistruthers.com)we manufactured hundreds of shell and tube heat exchangers, waste heat boilers, steam drums, breach lock / screw plug exchangers our we have manufacturing shops at Sapula, OK, USA & Joplin, MS, USA we have subcontract manufacturing shops in India, Korea, Mexico, Spain, UAE, Canada etc.
If you wish to have quote please send us the RFQ to ppottumuthu@teistruthers.com.
Please find our company brochure.
Thanks,
Pradeep.
#11
Posted 06 January 2010 - 02:18 AM
hope this email wont be too late
you may send enquiries to TMA-Joy industries asia pasific sdn bhd which is based in S'pore. we are subsidiaries of Sime Darby Berhad which is known for its branding image. you may send your email to my email, fatimah@joyindustries.com.
#12
Posted 09 January 2010 - 12:50 AM
Thank you Rajesh.
The company you advise to us is very interesting, but does not seem to be a specialist in thermo-hydraulic design of heat exchangers, neither HTRI member which is very important for us.
Best regards,
Kaodan.
Hello Kaodan,
Did not check this out for long. As far as I am aware the company is very much an HTRI member. However, I suppose you would finalized the contractor by now. If not, you can still consider them.
#13
Posted 11 January 2010 - 10:16 PM
i would say thanks for yellowstone if you could please respect this forum. your "?" is just wasting ppl time as we expect any good respond once we click any updated subjects.
Similar Topics
Jt Based Hcdp Design V/s Mechanical Refrigeration Hcdp Unit.Started by Guest_BabRafiq1_* , Today, 01:43 AM |
|
|
||
Overall Heat Transfer CoefficientStarted by Guest_T_bag_* , 16 Apr 2024 |
|
|
||
Rupture Disc DesignStarted by Guest_chaupradip_* , 13 Apr 2024 |
|
|
||
Thermal FuseStarted by Guest_Dr_bigfoot_* , 09 Apr 2024 |
|
|
||
Specific Heat DatabaseStarted by Guest_bckesim_* , 08 Apr 2024 |
|
|