Newest Articles
Electrical Process Tomography
ChExpress-November 12, 2008
ChExpress-October 28, 2008
ChExpress-October 14, 2008
ChExpress-September 30, 2008
ChExpress-September 16, 2008
ChExpress-September 2, 2008
ChExpress-August 19, 2008
Biodiesel: The Road Ahead
Methanol Plant Capacity Enhancement
Plate and Frame Heat Exchangers: Preliminary Design
Compressor Surging Under Control
Using RPM to Manage Maintenance
Plant and Equipment Wellness, Part 1: Observing Variability



banner2.gif (6526 bytes)

"Stirred-Tank Heat Transfer"

         The following lab report was written by myself during the senior year of chemical engineering at West Virginia University.  The results for the coefficient of the jacket are very good while the results for the coefficient of the coil are equally as bad.  The accuracy of the results (or lack thereof) are not really the motivation behind this report appearing here. The purpose is to show the structure of a well-developed lab report.  However, if you find yourself obtaining results that stray as far from the accepted values as the results in this report do, you may want to run another trial of your experiment.

Abstract
Introduction
Theory
Experimental Methods
Discussion and Results
Conclusions and Recommendations
Nomenclature
References, Figures, and Tables
Appendix should also be included, but will be ommitted from this site

ChE Plus Subscriber - Click Here for a Printable Version

Send this Page to a Friend

Fill out your email address to
receive notification of site updates
and instantly receive five technical
questions and answers
!
Email Address:
First Name:
Last Name:

State:

Country:

Industry:

Position:

Signup Remove