Community Status Updates
Winston P. Ekpotu → Padmakar Katre
I am a final year student of Chemical Engineering in the University of Nottingham UK. I am currently doing my final year design project which involves the design of a hydrocyclone for separation of solids from slurry. The total flow is about 5000 L/min, and the density difference is about 0.6g/cubic cm. Based on the Bradley Design equations, I got a diameter of about 55 cm, and a pressure drop of about 65 psi. Since I have not had any hands on experience with this equipment, I don't know...
Feb 25 2012 07:53 PM
ratsuyim → Padmakar Katre
Hi, i saw that you had the hysys file for ASU plant in one of the threads. Do you mind sending me miyustar@gmail.com the hysys file for reference as currently I am stuck with the simulation.
Feb 08 2012 03:30 AM
Julian Arch → Padmakar Katre
Hi, I am a university student in the UK,saw that you have experience with thermal oxidizers.I have been given a design project where i have to design a thermal oxidizer or fired heater? to get rid of a stream of gas that consist of 86% nitrogen, 0.3% Methane and the rest CO2, H2 and H2O. Im expected to do calculations on them etc. Have not got a clue on where and how to start the task. Hope you could advice on this. All i have is the pressure and temperature of that gas stream.PLEASE advice....
Feb 07 2012 08:26 PM
-
chingz
I's stuck on the Plant operating procedures for and ASU plant. Do u mind sending me the hysys file for my reference. id: rezound87@hotmail.com .will appreciate ur kind effort. thanks
Dec 27 2011 01:38 PM
Padmakar Katre
Hi Chris, Great work, new looks of forum are really nice and much attractive.
Aug 27 2011 01:05 AM
-
Chris Haslego
Thank you. The transition went as smoothly as possible.
Aug 27 2011 09:59 PM
ali.jabbaran → Padmakar Katre
Hi Dear;
I read a post from you and find your simulation file on power plant simulation.
Actually I'm working on a power plant project.
It would be appreciated if you could help me on following question:
how can I choose a proper efficiency for compressor and turbine to relie on simulated total power?
I saw you selected 99% for compressor and 90% for Turbine
I ...
Aug 16 2011 04:28 AM
I read a post from you and find your simulation file on power plant simulation.
Actually I'm working on a power plant project.
It would be appreciated if you could help me on following question:
how can I choose a proper efficiency for compressor and turbine to relie on simulated total power?
I saw you selected 99% for compressor and 90% for Turbine
I ...
mehul → Padmakar Katre
dear sir ,
finally i have converge butadiene simulation with hysys,pl.see it,i have problems with after washer.
Mar 16 2011 07:04 AM
finally i have converge butadiene simulation with hysys,pl.see it,i have problems with after washer.
-
Vimalesh Agnihotri
Happy birthday sir.....
Mar 30 2011 08:49 AM
Padmakar Katre → Art Montemayor
Hello Dear Art,
Wish you many happy returns of the day. May God bless you. I wish if I could be part of the celebrations today.
Mar 12 2011 10:22 AM
Wish you many happy returns of the day. May God bless you. I wish if I could be part of the celebrations today.
Padmakar Katre
27th Feb 2011, the happiest day of my life, I became father. It was a great feeling to see my sweet daughter first time.
Feb 28 2011 09:49 PM
-
rowanlim
Congratulations! All the best! <3
Mar 02 2011 09:37 AM -
alokjaiswal
Dear Padmakar,
Congrats man, wish you all the happiest moments that god can shower on you.
Mar 04 2011 03:36 AM -
binzee
Congrats,
May 24 2011 08:09 AM
katmar → Padmakar Katre
I tried to send you a message, but it would not go through. Is your in box full? Anyway, thanks for your message to me.
Feb 05 2011 08:43 AM
Padmakar Katre → katmar
Dear Mr.Harvey,
Had the opportunity to go through your website. Really worth browsing by every chemical engineer. It's privilege to be among the ChE authorities like you, Art, Ankur and Zauberberg.I am lucky enough to have you all at one platform i.e. ChE community here. Have a nice time there.
Feb 04 2011 11:29 AM
Had the opportunity to go through your website. Really worth browsing by every chemical engineer. It's privilege to be among the ChE authorities like you, Art, Ankur and Zauberberg.I am lucky enough to have you all at one platform i.e. ChE community here. Have a nice time there.
Padmakar Katre → kkala
Thanks for the concern and the nice words. Have a nice time ahead.
Jan 16 2011 09:59 AM
kkala → Padmakar Katre
Good that you are well again, hope you will soon recover completely.
Jan 16 2011 03:43 AM
Padmakar Katre → Qalander (Chem)
Dear,
Thanks for your warm words in the mail, I received today. Indeed it's a privilege to have friends like you.
Jan 10 2011 09:27 AM
Thanks for your warm words in the mail, I received today. Indeed it's a privilege to have friends like you.