Community Status Updates

During engineering phase of compression facilities project , the contractor has proposed for us to use TMPCP pipe in the processing area(compression section ,HP &LP flares , inlet separation) in accordance with code API 5L Psl2 X60 , ours standard is to use pipe for process purpose in accordance with ASME B31.3 effluent : natural gas concerned pipe size: 64" ,56",48",36",.......8" pressure = 10 to 57 bara temperature= 10°c to 140° material : CS , LTCS...

Dear Art,
Thanks a lot for accepting me as one of your friends.
Fallah

Dear Ervin,
Thanks for your kind attention.
Best Wishes,
Fallah

Dear Lokesh,
Thanks a lot,for your attention.
Best Wishes,
Fallah

Hi fallah, Happy birthday..

Happy Birthday Fallah,
Wish you all the best
and more sharing on relief system :)
Good Bless You

Dear Fallah.
I'm very happy to know you and Can you help me this question?
How to calculate discharge Coeifficien(Cd)for RO in choked condition(blowdown)?
My calculate :P1 = 111 bara, drop pressure = 106 bar.
Can you guide me alot of ebook which talking this probleme?
I'm new engineer and I know that I'm must more learning.
Thank Fallah

dear Fallah
referring to my last post, please find below my direct email address:
svaezi@istt.org

Dear Mr. Fallah
do you have flarsim software or any other software capable of designing flare system (stack, tip and radiation.).
best Regard
saeid vaezi

Thanks for accepting me as a friend.

Ready for assistance in any technical issue.Baraye hamvatan-e khoobam!

me too. Thanks for accepting me. mamnoonam

Glad being in your friengs list.
Regards

thank for your nice advice

Dear Sir
please let me know if there is a book about flare?
Regards