Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

How To Add Fccu Reactor In Hysys

refinery fluid catalytic cracker reactor hysys simulation

This topic has been archived. This means that you cannot reply to this topic.
1 reply to this topic
Share this topic:
| More

#1 sunny0

sunny0

    Veteran Member

  • Members
  • 35 posts

Posted 19 September 2013 - 12:20 AM

Greetings,

 

I am trying to simulate FCCU on HYSYS.

I have HYSYS 2006 version installed with HYSYS FCC 2006 spreadsheat as well.

 

Now the problem is i do not find the Fluid Catalytic Cracking Reactor in HYSYS component tools section.

I am scared from where to get this FCC reactor in HYSYS.

 

Before this i had completed the simulation of Atmospheric Distillation Column & its product stream of AGO is actually the feed of FCC reactor. But i am unable to find FCC reactor in HYSYS.

 

Somebody can help me in this regard?

Your replies are appreciated in advance.

Kind Regards,

Sunny.



#2 keyns

keyns

    Brand New Member

  • Members
  • 1 posts

Posted 10 December 2013 - 02:10 PM

Sunny,

HYSYS doesn't have the FCCU module in tools. But i think aspen has spread sheet version of FCCU reactor. You should have RefSYS from Apsen.

 

 

Keyns






Similar Topics