Hi Guys,
Does anyone happens to know how to calculate boiling point of Mixture in VMGSim?
Thanks in advance,
|
Posted 19 November 2014 - 06:21 PM
Hi Guys,
Does anyone happens to know how to calculate boiling point of Mixture in VMGSim?
Thanks in advance,
Posted 20 November 2014 - 02:19 AM
you can estimate the boiling point (incipient vaporization) of a mixture as bubble point,
in a similar way you can estimate the dew point (incipient condensation),
usually you can access a table with the properties of the stream
or you can solve a flash with specified liquid (or vapor) fraction,
this way can be useful for wide boiling mixtures where you
may wish to know how composition changes as liquid vaporizes.
I have a different software (Prode) but I expect you should find similar features in yours.
Hydrocarbon Dew Point Control UnitStarted by Guest_BabRafiq1_* , 05 Apr 2024 |
|
|
||
Heat Required For Boiling Liquid MixturesStarted by Guest_halkeshhulk_* , 07 Oct 2023 |
|
|
||
Increasing Raw Natural Gas Dew PointStarted by Guest_lowrentstuff_* , 18 Sep 2023 |
|
|
||
Dew Point Margin In Strippers & Fractionation ColumnsStarted by Guest_Venkat @89_* , 05 Sep 2023 |
|
|
||
Hydrocarbon Dew Point Control Using Propane Refrigeration Loop.Started by Guest_BabRafiq1_* , 10 Jul 2023 |
|
|