No replies to this topic

[Sridhar P]

Dear Sir,

01. Net volume will be low water level to max water level. Low water level will be just at the top of suction nozzle. Max water level will be just at the bottom of overflow nozzle.(free board will be from top of overflow nozzle to max tan length of the tank. Pl. correct me if wrong.



02. How to calculate Gross volume of tank-does it inlcude the dead volume below the suction nozzle + net volume or dead volume below suction nozzle + net volume + volume above max water level till the tan lenght of the tank.

03. How to calculate hydro test weight of the tank. Is it to be calculated upto the overflow nozzle or till the tan lenght of the tank.

Thanks and Regards,
P.Sridhar

Edited by Sridhar P, 13 January 2011 - 08:12 AM.