|
Dual Turbine
Started by nox, Dec 02 2011 02:58 AM
1 reply to this topic
Share this topic:
#1
Posted 02 December 2011 - 02:58 AM
also,
run your turbine spread sheet for various boiler temperatures (at least 10), keeping pressure constant, and plot the efficiencies vs temperature. Upload a spread sheet with your model and a graph of your result
my model without graphing http://www.mediafire...vjwasvlqsl78xo9
be sure that macro is open to work on it.
hmmm for turbine does the temperature vs efficiency , increase or decrease? would it be straight line [linear]
my turbine is one cycle and I need it as two cycles , two turbines , two compressors, and two pumps
#2
Posted 02 December 2011 - 12:20 PM
anything would be helpful
Similar Topics
Turbine Driven PumpStarted by Guest_Rahimzadeh_* , Yesterday, 09:14 AM |
|
|
||
Caustic Tower In One Dual Feed Cracker UnitStarted by Guest_VIrendra20911_* , 03 Nov 2022 |
|
|
||
Steam Turbine Extraction And Letdown ValveStarted by Guest_zavtranguyen_* , 07 Oct 2022 |
|
|
||
Gas Turbine Simulation, Part-Load OperationStarted by Guest_twana_* , 21 Jul 2022 |
|
|
||
Steam Turbine Flow Configuration EnquiryStarted by Guest_Said Salim_* , 09 Mar 2022 |
|
|