hi, my name is virat. i m a student of chem. engg. from india. after graduation i want to go in the designing field but unfortunately i did not get the deep knowledge of designing from our inst. so, i need some important guidelines, that how can improve my designing knowledge. i m very interested in the designing of pressure vessels and heat exchangers.
please help me...........
|
Equipment Design
Started by Guest_virat_*, Dec 16 2005 11:24 PM
1 reply to this topic
Share this topic:
#1 Guest_virat_*
Posted 16 December 2005 - 11:24 PM
#2
Posted 17 December 2005 - 02:09 PM
Virat:
Read the previous thread where the subject of vessel design knowledge is discussed.
If you want to specialize in vessel design, I believe you are in the wrong school of Engineering. You should be registered in the School of Mechanical Engineering, where this is one of the focused subjects and where it is dealt with in great detail. The School of Chemical Engineering, as I have complained, does not deal with this important process subject to my knowledge.
Read the previous thread where the subject of vessel design knowledge is discussed.
If you want to specialize in vessel design, I believe you are in the wrong school of Engineering. You should be registered in the School of Mechanical Engineering, where this is one of the focused subjects and where it is dealt with in great detail. The School of Chemical Engineering, as I have complained, does not deal with this important process subject to my knowledge.
Similar Topics
Design And Fabrication Of Reflux DrumStarted by Guest_Femi_* , 22 Apr 2024 |
|
|
||
Rupture Disc DesignStarted by Guest_chaupradip_* , 13 Apr 2024 |
|
|
||
Design Compressor For 35% H2S & 1.05Ksca Suction PressureStarted by Guest_GanjiS_* , 29 Apr 2024 |
|
|
||
Jt Based Hcdp Design V/s Mechanical Refrigeration Hcdp Unit.Started by Guest_BabRafiq1_* , 19 Apr 2024 |
|
|
||
Falling Film Reactor Design CalculationStarted by Guest_Emranm02_* , 07 Apr 2024 |
|
|