3 replies to this topic

[engware]

To All:

I would like to invite both Forum members and visitors to start a discussion on Power Cycle Components/Processes Analysis (Technical Peformance Analysis of Compression, Combustion, Expansion, Mixing, Heat Transfer etc.) -- ask questions of interest, share knowledge and experience related to Power Cycle Components/Processes Analysis.

Also, everybody is welcome to contribute to the Power Cycle Components/Processes Analysis topic.

Thanks,

Gordan

Below are a few plots related to combustion -- complete combustion of coal, oil and gas with air at standard conditions (298 [K] and 1 [atm]) with no heat loss and stoichiometric conditions.

[Adriaan]

One observation; many installations could get significantly more energy efficient if they were changed to allow re-superheating. This would also reduce emissions in the form of cooling water etcetera.

[you]

Good ,
Did you study the difference between the pritchard cycle, cascade cycle and Teel cycle , I want to kmow te difference between the three and which is the best (efficieny) ?
and what is better the trboexpander or J-T VALVE and why?
Thank you for your answer

[engware]

Hi there:

I am sorry to admit, but I have not had a chance to study the mentioned power cycles.

Also, I do not have an answer to your second question.

I would suggest that you check out Wikipedia.org and/or any major Search Engine.

Thanks,

Gordan