Forums
Blogs
Articles
File Library
FAQ
Search
FB
I want to do steady state process simulation of entire refinery CCR in aspen refsys v10. In Aspen refsys reactor module, in simulation environment , i can see net h2 and net reformate out as priduct streams. While calibrating the reactor in calibration environment , i could see stabilizer overhead , vent h2 and stab ovhd liq also for product measurement. I have configured this reactor in hysys without recontactor and stabilizer option.. why this diiff?
|
|
0
Continous Catalytic Reformer (Ccr) Reactor Simulation In Aspen Hysys
Started by CHEMSTRONG, Mar 23 2018 01:38 PM
3 replies to this topic
Share this topic:
#2
CHEMSTRONG
-
- Members
-
- 348 posts
Gold Member
Posted 23 March 2018 - 01:40 PM
Request reply from honourable members as I m literally stuck in covergence.
#3
Nikolay_
-
- Members
-
- 167 posts
Gold Member
Posted 23 March 2018 - 09:45 PM
Do you have manual or other materials?
Regards,
Nikolay
Regards,
Nikolay
#4
CHEMSTRONG
-
- Members
-
- 348 posts
Gold Member
Posted 24 March 2018 - 02:39 AM
Dear Sir,
I do not have any manuals with me now.
Regards,
Chetan Chavan
Similar Topics
Beginner Question: Inlet Separator Design In Aspen Hysys (Natural Gas,Started by Guest_NewEng2030_* , 12 Feb 2026 |
|
|
||
Hysys Separator Carryover Setup And Phase EnvelopeStarted by Guest_powerox29_* , 05 Jan 2026 |
|
|
||
Use Of Case Studt On Aspen Hysys SimulationStarted by Guest_vtf1221_* , 13 Dec 2025 |
|
|
||
Smr Reformer Tube Hot BandStarted by Guest_kaidlut_* , 07 Aug 2025 |
|
|
||
Simulation Of Natural Gas Water Dew PointStarted by Guest_guoyinyanliner_* , 03 Nov 2025 |
|
|
