Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

0

No Conversion In Hysys

hysys cstr no conversion

No replies to this topic
Share this topic:
| More

#1 ChE student17

ChE student17

    Junior Member

  • Members
  • 12 posts

Posted 23 November 2018 - 02:40 PM

Good day,

I have posted a problem in here few days ago. But since nobody has yet to answer it, it got me thinking that maybe others find the case of my error complicated.

 

I would just like make it simpler. What may be the possible causes of error in HYSYS that can result in no conversion value as output?

An example is for my case, where there is no value for overall conversion when all reactions are placed together.
*The first image shows that there's no value for overall conversion when a reaction set of multiple reaction is used.
*However, the second image shows that it can solve for overall conversion for a reaction when only 1 reaction is isolated per reactor. Thus, it leads me to conclude that there is no error in my input kinetics.

P.S. Sorry if I need to post again since I urgently need a workaround for my problem. Hope the community in here understands my situation.

Attached Files


Edited by Lactic Guest, 23 November 2018 - 02:44 PM.





Similar Topics