|
|
0
Brand New Member
Posted 12 February 2019 - 08:26 AM
Hello all,
I am simulating a claude liquefaction cycle in HYSYS for the liquefaction of air. The simulation works fine until I try to connect the recycle stream (11') to the air inlet and then it will not converge. I have attached screenshots of before and after attaching the stream. Any help would be hugely appreciated,
Matt. 
Before.PNG 178.56KB
8 downloads
After.PNG 299.43KB
6 downloads
Gold Member
Posted 12 February 2019 - 03:32 PM
You need only one of the recycle blocks, not 3.
Brand New Member
Posted 03 February 2020 - 05:19 PM
Hysys Expander/compressor Input Using Dimensionless CurveStarted by Guest_Alfreedo_* , 21 Apr 2025 |
|
|
||
Water Hammer Study: Hysys Dynamics Vs PipenetStarted by Guest_powerox29_* , 07 Apr 2025 |
|
|
||
Need Help In Hysys For Production Of Vinyl AcetateStarted by Guest_christinalee12_* , 31 Mar 2025 |
|
|
||
Aspen Hysys - Blowdown Utility Heat Flux MethodStarted by Guest_yuvi.ardekar1999@gmail.com_* , 27 Feb 2025 |
|
|
||
Api Calculation In HysysStarted by Guest_phoroogh_* , 22 Feb 2025 |
|
|
Forums
Blogs
Articles
File Library
FAQ
Search
FB
