Dear all,
I would like your help and sharing your knowledge/experience on the cold box design.
Thank you in advance!
|
Posted 03 July 2019 - 03:22 PM
Dear all,
I would like your help and sharing your knowledge/experience on the cold box design.
Thank you in advance!
Posted 03 July 2019 - 06:42 PM
You need only to develop the specifications. Then let the equipment supplier design it.
Bobby
Posted 04 July 2019 - 08:17 AM
Hi,
Cold box is nothing but a Brazed Aluminium Heat Plate Fin Heat Exchanger.
As Bobby rightly said, you need to develop a technical specification and the vendors will design the same for you.
Refer API 668 or ALPEMA standard for the same.
Regards
Posted 04 July 2019 - 01:08 PM
Hello to both of you and thank you for your response. Maybe, I did not epxress myself properly.
What I specifically I wanted to ask is how we start from the srcatch the design, which means how many LNG Heat exchangers we will use, how we will combine the different streams and generally its simulation.
Posted 04 July 2019 - 04:31 PM
You need to do some work to show. We have no idea what your process is.
Bobby
Posted 31 August 2019 - 09:37 AM
Posted 01 September 2019 - 06:16 AM Best Answer
https://www.kobelco....ex/coldbox.html
Hi,
Let you contact this supplier with your spec sheet .
note : Consider your favourite search engine , key words :cold box design
Good luck
Breizh
Design And Fabrication Of Reflux DrumStarted by Guest_Femi_* , 22 Apr 2024 |
|
|
||
Jt Based Hcdp Design V/s Mechanical Refrigeration Hcdp Unit.Started by Guest_BabRafiq1_* , 19 Apr 2024 |
|
|
||
Rupture Disc DesignStarted by Guest_chaupradip_* , 13 Apr 2024 |
|
|
||
Falling Film Reactor Design CalculationStarted by Guest_Emranm02_* , 07 Apr 2024 |
|
|
||
Hot Oil Loop / Heating Medium DesignStarted by Guest_Lyne_* , 30 Mar 2024 |
|
|