|
0
3 replies to this topic
Share this topic:
#1
Posted 19 May 2020 - 08:25 AM
I work in ammonia plant compressor room, our syngas compressor operates at 200 kscg pressure, if that pressurised pipeline cracked and led to a jet fire what is the best way to eradicate that fire?
Thanks in advance..
Reynold
Thanks in advance..
Reynold
#2
Posted 19 May 2020 - 11:28 AM
Shut off the fuel and get away. Cool the area with water spray if possible to keep the flames from spreading. Let the fire burn out then rebuild if the economics warrant.
#3
Posted 20 May 2020 - 02:55 AM
Hi,
You should talk to your supervisor and/ or HSE manager about the condition in your facility . PM program should be in place to prevent such event .
Good luck
Breizh
#4
Posted 20 May 2020 - 06:55 AM
Should i use a B C type fire extinguisher online to the jet fire and then depressurise the system and take a shutdown of my plant and attend that pipeline crack? Is it the right way?
Thanks in advance
Reynold
Thanks in advance
Reynold
Similar Topics
Psv Fire Case Relief Load CalculationStarted by Guest_mahmooddalvi09_* , 21 Feb 2024 |
|
|
||
Fire Ball DistinguisherStarted by Guest_Rahimzadeh_* , 22 Dec 2023 |
|
|
||
Hx Psv Sizing: Tube Side Fire Case With Shell Side Being Steam.Started by Guest_tamueng_* , 07 Nov 2023 |
|
|
||
Activated Carbon Fire RiskStarted by Guest_AndyChemEng_* , 03 Aug 2023 |
|
|
||
Answered
Fire Zone Flare SizeStarted by Guest_seuenergy_* , 01 Jun 2023 |
|
|