|
0
Simulation Of Reboiled Absorper As A Distillation
Started by Abdulrazzaq S. Abdullah, Jul 05 2020 12:05 AM
1 reply to this topic
Share this topic:
#1
Posted 05 July 2020 - 12:05 AM
I convert reboiled absorber to distillation , the top gas out is condensed and part of it return to the top as recycle.How I can make the recyle as specified variable in absorber?
#2
Posted 19 July 2020 - 07:01 PM
Somehow I do not think you can. There are not enough degrees of freedom. Incidentally what software are you using. I would recommend "ChemSep". It is free for the lite version and just simulate the distillation. Perhaps the easiest set of specifications are the bottoms flow rate and the Reflux Ratio. Then on the second go have a look at the RR suggested in the results.
Similar Topics
Olga And Aspen Simulation SoftwareStarted by Guest_CHEMSTRONG_* , 27 Mar 2024 |
|
|
||
Aspen Hysys SimulationStarted by Guest_amazingspidermean_* , 18 Mar 2024 |
|
|
||
Reactive Distillation MtbeStarted by Guest_Michael Mitra_* , 15 Mar 2024 |
|
|
||
Vacuum DistillationStarted by Guest_hysyshunter_* , 12 Mar 2024 |
|
|
||
Distillation Column DiameterStarted by Guest_refluxraider_* , 12 Mar 2024 |
|
|