|
0
Valves Api600 5.4.5 Bonnet Tapped Test Opening
Started by sar1988, Jan 20 2021 03:34 AM
valves api 600 bonnet teating design steel gate valves gate valves api
1 reply to this topic
Share this topic:
#1
Posted 20 January 2021 - 03:34 AM
Hi all
I'm design engineer from a valve mfg industry. Can anyone tell my understanding is right? If not can you explain me the below quoted term which mentioned in API 600
5.4.5 Tapped test openings shall be provided if specified by the purchaser under Bonnet section
"Tapped test openings".
It is threaded opening for testing the bonnet as like valve body shell test.
My understanding is correct?.
Thanks
GSN
I'm design engineer from a valve mfg industry. Can anyone tell my understanding is right? If not can you explain me the below quoted term which mentioned in API 600
5.4.5 Tapped test openings shall be provided if specified by the purchaser under Bonnet section
"Tapped test openings".
It is threaded opening for testing the bonnet as like valve body shell test.
My understanding is correct?.
Thanks
GSN
#2
Posted 20 January 2021 - 06:35 AM
I'm design engineer from a valve mfg industry. Can anyone tell my understanding is right? If not can you explain me the below quoted term which mentioned in API 600
5.4.5 Tapped test openings shall be provided if specified by the purchaser under Bonnet section
"Tapped test openings".
It is threaded opening for testing the bonnet as like valve body shell test.
My understanding is correct?.
Hi,
I think so...
Similar Topics
Valves On Low Pressure Steam ServiceStarted by Guest_Ali4269278331_* , 15 Apr 2024 |
|
|
||
Air Consumption For On Off ValvesStarted by Guest_itsmetinnie_* , 11 Mar 2024 |
|
|
||
Fail Open And Fail Close Of Instrument Control ValvesStarted by Guest_panagiotis_* , 04 Feb 2024 |
|
|
||
How To Choose Whether It Is Open Bonnet Or Closed Bonnet In Relief ValStarted by Guest_Radha Krishnan Siva Kumar_* , 02 Jan 2024 |
|
|
||
Operational Integrity Test StandardStarted by Guest_phoenixmoca_* , 12 Nov 2023 |
|
|