Please go through the attached flowsheet below.
My question is 408 stream should have some compressor for it to mix with 412 stream
Am I wrong?
|
Posted 03 June 2021 - 03:07 PM
Please go through the attached flowsheet below.
My question is 408 stream should have some compressor for it to mix with 412 stream
Am I wrong?
Posted 03 June 2021 - 03:44 PM
From the information supplied in the diagram, no compressor is necessary to mix streams 412 and 408. The mix of 412 and 408 (stream 409) will have its pressure at the lower of the two streams.
Edited by Pilesar, 03 June 2021 - 03:45 PM.
Posted 03 June 2021 - 10:42 PM
You never need to use a compressor if there is some quirk in your simulation. You can use a valve with a negative pressure loss.
Bobby
Posted 05 June 2021 - 07:06 PM
Thank you for reassuring.
Co2 Removal Membranes Between Compressor StagesStarted by Guest_Sinclc_* , 26 Mar 2024 |
|
|
||
Answered
Centrifugal Compressor Performance Curves In Aspen HysesStarted by Guest_Rafcio_* , 14 Mar 2024 |
|
|
||
Design Gauge Pressure Inlet To A Centrifugal Compressor.Started by Guest_Mohammad3799_* , 03 Mar 2024 |
|
|
||
Gas CompressorStarted by Guest_Md Ziaul Islam_* , 23 Jan 2024 |
|
|
||
Settle Out Pressure For Reciprocating CompressorStarted by Guest_prashant.badgujar_* , 03 Jan 2024 |
|
|