Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

0

Aspen Plus Query


No replies to this topic
Share this topic:
| More

#1 CHEMSTRONG

CHEMSTRONG

    Gold Member

  • Members
  • 348 posts

Posted 25 June 2022 - 02:34 AM

Dear Sir,

 

For ASPEN PLUS V11 Process Simulation Software , I have put Design Spec block to evaluate certain process logic in my process model.

 

But I have observed that say For example, there are two streams joining mixer and then there is a mixer outlet : for this , I have configured Design Spec here : 

 

But for Design Spec output or results sometimes is directed towards values which are configured in Input stream flow : Initial Guess of Design spec is influenced by Input stream Flowrate entered ?  What shall be the value of Initial Guess now?

 

Best Regards,

CHEMSTRONG 






Similar Topics