Hello,
I have a stream with following conditions
mol vap fraction: 0.98
mass flow: 132 kg/h
T: 40c
P: 11 bara
ammonia mass frac: 0.995
water mass frac: 0.005
How can I remove the water from this stream to ensure that it is water mass fraction is 0.0005
I have another stream S2 at:
mass : 2-3 kg/h
pressure: 10bara
temp: 351C
mass frac:
N2:0.72
NH3: 0.115
H2: 0.157
I was thinking of using a stripper but the diameter calculated in the aspen plus radfrac column is very small. Any guidance would help.
|
2
Remove Water From Ammonia Aspen Plus
Started by fmalik, Feb 12 2024 04:02 PM
1 reply to this topic
Share this topic:
Similar Topics
Aspen Hysys - Creating A New Component And Defining PropertiesStarted by Guest_catiiiii_* , 22 Apr 2024 |
|
|
||
Waste WaterStarted by Guest_refluxraider_* , 14 Apr 2024 |
|
|
||
Water Seal DrumStarted by Guest_Ali4269278331_* , 05 Apr 2024 |
|
|
||
How To Find K-Values Of A Hydrocarbon Mixture On Aspen Hysys?Started by Guest_Alexis Azamar_* , 08 Apr 2024 |
|
|
||
Rapid Depressurization Of WaterStarted by Guest_golegolegole_* , 31 Mar 2024 |
|
|