3 replies to this topic

[Paulogeorge]

Hello everyone,

I am a chemical engineering student currently in an internship with a company in air gases market.
My mission is to troubleshoot and design a new Direct Contact After Cooler (DCAC) for Air Separation Unit. 
In effect a hot air stream is being cooled directly using cooled water.

I want to ask if anyone can help me with needed steps how to design the structured packing column; Equations or available papers for public, identitcal work made before or anything can help

 

and if I have HETP how can I calculate the number of stages to make a simulation in aspen+ or hysys 

 

The attached pdf made by Koch Glitsch contains informations about different packings 

 

the used structured packing will be : Packing from Koch Glitsch : FLEXIPAC 2Y STRUCTURED PACKING IN POLYPROPYLENE OR FLEXIPAC 500Z HC STRUCTURED PACKING IN PFA 

Thanks in advance
 

[breizh]

Hi,

Get a copy of Perry's chemical engineers' handbook to support your work.

Check at your Uni or in the facility where you are currently working.

(PDF) DIRECT CONTACT AIR-WATER HEAT TRANSFER IN A COLUMN WITH STRUCTURED PACKING

 

267, 49, 0

 

Good luck 

Breizh 

[Paulogeorge]

Hi,

Get a copy of Perry's chemical engineers' handbook to support your work.

Check at your Uni or in the facility where you are currently working.

(PDF) DIRECT CONTACT AIR-WATER HEAT TRANSFER IN A COLUMN WITH STRUCTURED PACKING

 

267, 49, 0

 

Good luck 

Breizh 

Thank you very much Mr Breizh, I appreciate that

[breizh]

Hi,

other document.

Microsoft Word - 76sola-cervera.docx

Breizh

Attached Files

•  Direct contact gas liquid heat exchange for energy recovery.pdf   643.36KB   0 downloads