Hi,
Can anyone tell me how i can use HYSYS to model a FILTER. Seawater is going to pass through the filter.
|

Using Hysys To Design A Filter
Started by asade abiodun, Feb 20 2007 10:44 AM
2 replies to this topic
Share this topic:
#1
Posted 20 February 2007 - 10:44 AM
#2
Posted 20 February 2007 - 06:18 PM
asade,
Maybe I'm too much from "the old school", but I can't imagine there being a reason for simulating a filter. There's nothing to model beside pressure drop. You could use a valve or pipe section to do that.
Doug
Maybe I'm too much from "the old school", but I can't imagine there being a reason for simulating a filter. There's nothing to model beside pressure drop. You could use a valve or pipe section to do that.
Doug
#3
Posted 21 February 2007 - 02:50 AM
DJACK,
Thanks for the information.
Thanks for the information.
Similar Topics
Design Capacity Of Hydrogen Pullet During Hydroprocessing Units UpsetStarted by Guest_Divid Kelin_* , 18 Jun 2025 |
|
![]() |
||
Hot Oil Loop / Heating Medium DesignStarted by Guest_Lyne_* , 30 Mar 2024 |
|
![]() |
||
![]() Hello, Design Of Natural Gas Liquefaction Processes.Started by Guest_guoyinyanliner_* , 18 Jun 2025 |
|
![]() |
||
Aspen Hysys Simulation Of Acid Gas Removal UnitStarted by Guest_R.t_* , 22 May 2025 |
|
![]() |
||
![]() Scrubber DesignStarted by Guest_nasss_* , 07 Aug 2024 |
|
![]() |