55 replies to this topic

[jprocess]

Dear All,
I have a sizing program regarding to phase separators.This program is VB based and have the ability of sizing for different kind of separators including 2 phase(Vertical and Horizontal), 3 phase and accumulators.Anyone who is interested of having it send an e-mail to my address:
jprocessman@yahoo.com
Kindest Regards.

[aluma]

Thanks I would really need this

I would like to have it. Could you please send to me: charlesdeng601@hotmail.com

Thanks

Hi there,
Can you please send it to me as well. kebabhouse@gmail.com.
Thanks.

[wnovaes]

Jprosess,

I would appreciate so much to receive a copy of your Phase Separators Software. Thanks in advances.

Best Regards,
WSN.
(w_novaes@hotmail.com)

[djack77494]

Assuming the spreadsheet is not copyrighted, then please consider just posting it on this forum. That will avoid you receiving dozens of requests to do what you could accomplish with much less effort, plus make the end product more accessible to anyone interested in it.
Regards,
Doug

[ankur2061]

Dear jprocess,

It is very kind of you to share the separator spreadsheet. Kindly send it as below:

ankur2061@yahoo.co.in

Regards,
ankur2061

[fallah]

If it is possible ,i would like to have the separator spreadsheet.
My e-mail : n230f@yahoo.com

Thanks

[appy11]

I appreciate if you can send me to my email alpesh_uwo@yahoo.ca. I need for sizing Knockout drum.

thanks in advance

[pawan]

Will be better if U can upload it here so that everybody is benefitted without bothering you each time when a request is generated,

[anshulagr]

Please send me at anshulagr@yahoo.com

Thanks & Regards
Anshul

[mjd]

Please send me too on mjohndan@gmail.com

thanks and regards

mjd

[Padmakar Katre]

I will be thankful if you share your program with me.
Thanks In advance
my mail id is
pady_chem_iisc@inbox.com

Regards,
Padmakar Katre

[ankur2061]

Dear jprocess,

Is your spreadsheet still available? Have you put it on the forum? Can you mail it at: ankur_2061@hotmail.com

Regards,
ankur2061

[wnovaes]

Hi,

Please, may you e-mail me a copy as well?

Best Regards and Thanks in advance,
WSN.
e-mail: william.novaes@oxiteno.com.br

[Cheryl]

Could you please send me a copy as well?

xiruo98@hotmail.com

Thank you so much.

[Beergson]

I would be very pleased if You could send me a copy
My e-mail : info@wisla.plock.pl
Thank You in advance

[S.Chittibabu]

Dear All,
I have a sizing program regarding to phase separators.This program is VB based and have the ability of sizing for different kind of separators including 2 phase(Vertical and Horizontal), 3 phase and accumulators.Anyone who is interested of having it send an e-mail to my address:
jprocessman@yahoo.com
Kindest Regards.

Dear JProcess,

Could You please forward a copy of your program to me. My mail id is
chittibabu_s@yahoo.co.in
Thanks

[suhas]

If its not a copyrighted program kindly send a copy on my email id
suhas.nehete@gmail.com
Regards
Suhas

[cammy]

Dear jprocess kindly send PHASE SEPERATOR PROGRAM on mail id.

gaikwadkd@uniphos.com

[kranthi]

Hi

I would be very pleased if You could send me a copy.

kranthi.chunduri@woodgroup.com

Kind Regards

Kranthi Chunduri

[arvind]

Hi

I would be very pleased if You could send me a copy.

kranthi.chunduri@woodgroup.com

Kind Regards

Kranthi Chunduri

Plz if you got the same plz forward me on :
arvind_pawashe@yahoo.com




arvind

[dgoyal]

can u send me
goyal.chem@gmail.com

thanks
deepak

[pharodix]

Dear sir,

could you pls to send me a copy

Thanks a lot,

Warm regards

[cammy]

I would like to have it. Could you please send to me: gaikwadkd@uniphos.com