Hi all
I really need your help..
will explain to u what I am going to do exactly
1) I have to built a filter pilot plant for water treatment
For this filter, i have decided that to built the filter with three sections two PVC columns sections and one in the middle is Perspex column ( clear acrylic ) 300mm in outside diameter and 1m length.. but we prefere the thickness would be around 8mm
2) i can tell u that: i need to pump water from the bottom section of the filter which will be a PVC section,, and the flow rate will be around 180 L/H.to 300 L/H.. and the velocity will be around 5m/h and 10m/h..and i will put some materilas ( polymer beads ) inside the filter that will treat the water. i will pump air as well from the bottom to wash the materials once it is dirty..
By the way: my flow will be upflow
My qusestions are
1- What is the downflow wash water for floating media filter ? and what is upward wash air for floating media filter ? Is there any range ? in oder words : what is the typical backwash rate for upflow floating media filter ?
2- Could i calculate the amount of water and air the i need it for backwashing the media ? Could u help me with it ?
3- How can i calculate the pressure loss through the media before running any experiments ?
4-What about the required pressure of the system ?
I really have no feeling about these questions.. so could u help me with them ?
Best regards
|
Please Help Me With Pressure Drop
Started by Bashir, Aug 13 2008 10:27 AM
No replies to this topic
Share this topic:
#1
Posted 13 August 2008 - 10:27 AM
Similar Topics
Pressure Loss In Piping - Cooling Tower-Shelltube HeatexchangerStarted by Guest_Alneto_* , 29 May 2024 |
|
|
||
Looking For Mecl (R40) Enthalpy Pressure DiagramStarted by Guest_fredlan54_* , 28 May 2024 |
|
|
||
Pressure Control In Batch Distillation ColumnStarted by Guest_Femi_* , 14 May 2024 |
|
|
||
Dp Drop In Structured Packing Amine Absorber Causing IssuesStarted by Guest_kek12345_* , 10 May 2024 |
|
|
||
Design Compressor For 35% H2S & 1.05Ksca Suction PressureStarted by Guest_GanjiS_* , 29 Apr 2024 |
|
|