3 replies to this topic

[SeanK]

Hi to all,

Could anyone please let me know about the steam recovery systems for the plant (Petrochemical and Oil and Gas)

I would like to know more about the steam recovery systems

Thanks

[ankur2061]

SeanK,

Since your question is so general I am suggesting a couple of weblinks which may be useful in understanding steam recovery from condensate. These may be applicable to any installation (oil and gas/petrochemical) where large quantities of steam are available for various energy intensive processes. Here I use the term energy intensive since steam energy could be utilized as heat energy (process heating) or conversion to mechanical energy (turbines to drive machinery).

http://www.spiraxsar...flash-steam.asp

http://www.armstrong...ensate-recovery

Hope this helps.

Regards,
Ankur.

[SeanK]

Ankur,

Thanks for the information

Regards

Sean

[AngieD]

Hi to all,
Could anyone please let me know about the steam recovery systems for the plant (Petrochemical and Oil and Gas)
I would like to know more about the steam recovery systems
Thanks

Sean,

Is your steam recovery system part of a larger cooling system? If so, this webinar next week may help, I signed up yesterday...

"Simulating Cooling Systems for Efficient Design"
This educational session will discuss the use of system-level simulation on liquid cooling systems to address key design considerations and common challenges in power generation, plant and process industries.
https://flowmaster.w...92&RT=MiM3&FM=1