Hi
could anyone please let me know about the pipe line hydraulics in Hysys,
while defining the pipe segment what input data i have to enter and what kind of output i can get regarding hydraulics analysis
please clarify my doubt
Regards
Sean
|

Pipe Line Hydraulics
Started by SeanK, Dec 31 2008 03:15 PM
3 replies to this topic
Share this topic:
#1
Posted 31 December 2008 - 03:15 PM
#2
Posted 06 January 2009 - 08:25 AM
Sean,
A look in Hysys Operations Guide manual will clarify your unknowns. The manual doesn't come with the software, but a legitimate user can download it from Aspentech website. Of course you need to be registered to be able to do that.
I am assuming that people posting questions here are reading the manuals first. In a lot of cases it seams I am wrong. Nobody can replace individual study, regardless of experience and/or training.
Good Luck
A look in Hysys Operations Guide manual will clarify your unknowns. The manual doesn't come with the software, but a legitimate user can download it from Aspentech website. Of course you need to be registered to be able to do that.
I am assuming that people posting questions here are reading the manuals first. In a lot of cases it seams I am wrong. Nobody can replace individual study, regardless of experience and/or training.
Good Luck
#3
Posted 07 January 2009 - 11:47 AM
Sean,
HYSYS has a special features detecting the degree of freedom. If you provide sufficient inputs (in Blue) and make zero degree of freedom, other parameter will be calculated (in Black). So... try it out yourself.
HYSYS has a special features detecting the degree of freedom. If you provide sufficient inputs (in Blue) and make zero degree of freedom, other parameter will be calculated (in Black). So... try it out yourself.
#4
Posted 12 January 2009 - 08:16 AM
Dear,
Why don't you try PipeSys extension in Hysys for a detailed modelling of the pipeline and to understand the hydraulics. For pipe segment modeling you refer to Aspen Tech's Hysys Unit Operations Guide and for PipeSys you can get the tutorials from aspentech website.
Why don't you try PipeSys extension in Hysys for a detailed modelling of the pipeline and to understand the hydraulics. For pipe segment modeling you refer to Aspen Tech's Hysys Unit Operations Guide and for PipeSys you can get the tutorials from aspentech website.
Similar Topics
![]() Pipe Fluid Temperature Increase Due To Solar LoadingStarted by Guest_HeemeshJ126_* , 06 Apr 2016 |
|
![]()
|
||
![]() Guidance On Sizing Jacketed Pipe For Glycerine CoolingStarted by Guest_Kentucky08_* , 28 Jun 2025 |
|
![]() |
||
Ammonia Line Vapor GenerationStarted by Guest_simadri_* , 07 Apr 2025 |
|
![]() |
||
![]() Flow Through Normally No Flow LineStarted by Guest_iippure_* , 08 Apr 2025 |
|
![]() |
||
Inlet Line Not Free DrainingStarted by Guest_Asifdcet_* , 07 Apr 2025 |
|
![]() |