No replies to this topic

[yclee99]

I'm new in dynamic simulation. Currently i'm using a dynimic simulation software from Japan. I am facing problem realated to the reactor. The reactor model in the software is multi segment perfect mixing model. The result that I got from the simulation, 1st segment of the reactor always has the higherst temperature. Besides that, almost 99.99% reactions occur at the 1st segment. Which parameters I should tune in order to distribute the reactions happen in other segment (eg. segment 2,3...10)

Tuning parameters: Reaction rate coef. (frequency factor) - Ke1, activation energy (Ke2), concentration exponent (Xe), pressure exponent (Pe), and temperature exponent (Te).