Hello everyone,
I'm a student currently doing my master thesis. I am using a cstr reactor with two pumps. I set the flow rate for both pumps and let it run to a steady state.
Later using a function generator , i forced the reaction with a sine wave giving the following inputs.
I set the voltage to be 0.2v, frequency =2.0mHz, Amplitude=0.1929v , Offset-0.0071volts.
My doubt is if i keep the concentration as constant, how can I realize that there is chage in flowrate?
Other doubt for the same experiment, Is it possible to run the experiment with concentration and flowrate not equal = constant??
Any suggestions or answers would be really helpful.
Thanking you