|
Utility Steam Model, Cost Model
#1
Posted 23 April 2016 - 11:39 AM
For refining utilities, many companies like aspent , kbc providing a steam model or called energy model where it calculates the cost associated with current steam operating condition and it can optimize the operating scenarios by switching some turbines or morots .
I would like to bulid up the model through excel sheet but it seems it is difficult some how and i need your help to share any excel sheet configured for same purpose.
Our system consist of two gas turbines with wasteheat boilers, two steam turbines , letdown station for four steam grades , two steam fired boilers.
Your usual support is highly appreciated
#2
Posted 23 April 2016 - 08:33 PM
Energy accounting By Kenneth E.Nelson Kentec Inc.
Hi ,
let you try to get a copy of this paper , it was published in Chemical Engineering magazine a couple of years ago (20+) !! You should find references using Google or this forum (search engine) .
Good luck
Breizh
Edited by breizh, 24 April 2016 - 05:03 AM.
#3
Posted 23 April 2016 - 09:41 PM
Hi,
Other resources attached to support your work.
https://www4.eere.en...l/SSMTGuide.pdf
https://www4.eere.en..._tool/resources
Good luck
Breizh
Edited by breizh, 24 April 2016 - 04:44 AM.
#4
Posted 24 April 2016 - 12:14 PM
Thanks for your sharing and support, you are the hyper active supporter in this forum... Thanks alot
If anybody can share spread sheet with similar model were i can plug my data will be appreciated
Thanks
#5
Posted 25 April 2016 - 02:36 AM
Hi Eyyad.
I don't know the processing scheme of your refinery but I'm quite confident that other sources of steam are available there.
One of the starting step of your work should be preparing lists of all producers and consumers of steam and power in the refinery. Of course with their relevant productions and consumptions.
A subsequent step would be the identification of some real operating scenarios and their relevant balances.
As usual, the more details you'll provide of your working steps, the more help you could obtain.
Good luck
#6
Posted 26 April 2016 - 11:13 AM
#7
Posted 18 May 2016 - 02:34 PM
Similar Topics
Flash Steam Vessel SizingStarted by Guest_JohnFields343_* , Yesterday, 12:03 PM |
|
|
||
Valves On Low Pressure Steam ServiceStarted by Guest_Ali4269278331_* , 15 Apr 2024 |
|
|
||
Steam AccumulatorStarted by Guest_Valeriacortez11_* , 15 Apr 2024 |
|
|
||
Answered
Steam Pressure Requirements For Limpet Batch ReactorStarted by Guest_golegolegole_* , 10 Apr 2024 |
|
|
||
Aspen Custom Model Won't Load Into HysysStarted by Guest_SaintLazarus_* , 21 Mar 2024 |
|
|