I want to simulation a SourGas absorber in Aspen Hysys.
But it I cant converge it. Help Me...
|
Posted 19 November 2016 - 12:26 PM
I want to simulation a SourGas absorber in Aspen Hysys.
But it I cant converge it. Help Me...
Posted 14 December 2016 - 01:44 AM
According to your diagram, firstly you should define the lean amine circulation rate according to the acid gas you want remove, the calculation sheet is provided by cheresource according to GPSA databook,you could downloaded it freely. The temp of the sour gas is proper, you should adjust the temp of lean amine ,may be 6 ℃ upper than the feed gas(if utility is available). i donot know your hysys versions, may be if you attatched your model, i can help you.
Aspen Hysys - Creating A New Component And Defining PropertiesStarted by Guest_catiiiii_* , 22 Apr 2024 |
|
|
||
How To Find K-Values Of A Hydrocarbon Mixture On Aspen Hysys?Started by Guest_Alexis Azamar_* , 08 Apr 2024 |
|
|
||
Ammonium Sulfate Process SimulationStarted by Guest_amir55261_* , 06 Apr 2024 |
|
|
||
Extension Reaction Kinetic In HysysStarted by Guest_Ulbert Zsolt_* , 29 Mar 2024 |
|
|
||
Olga And Aspen Simulation SoftwareStarted by Guest_CHEMSTRONG_* , 27 Mar 2024 |
|
|