I have to design a quench tower for my final year design project, am calculated the diameter of the column from the sherwood corrrelations, but i am not quite sure how to calculate the height of the column. Another problem i have is determining the pressure drop over the column an appropriate Operating pressure for the column. Gas feed streams to the colum is at 232C an 1152kPa and the liquid feed stream at the top of the column is at 35C and 138kPa. Can you please help me.
Thank you Renaldo
|
Quench Tower
Started by Guest_Renaldo_*, Mar 14 2008 11:28 AM
1 reply to this topic
Share this topic:
#1 Guest_Renaldo_*
Posted 14 March 2008 - 11:28 AM
#2
Posted 06 October 2008 - 09:48 PM
QUOTE (Renaldo @ Mar 14 2008, 12:28 PM) <{POST_SNAPBACK}>
I have to design a quench tower for my final year design project, am calculated the diameter of the column from the sherwood corrrelations, but i am not quite sure how to calculate the height of the column. Another problem i have is determining the pressure drop over the column an appropriate Operating pressure for the column. Gas feed streams to the colum is at 232C an 1152kPa and the liquid feed stream at the top of the column is at 35C and 138kPa. Can you please help me.
Thank you Renaldo
Thank you Renaldo
Hi Renaldo,
i have nearly the same problem like you. Did you get usefull informations. I'm now at the beginning of my work. If you have any informations about it, can you please post them.
Thanks Gissy
Similar Topics
Minimum Tower DiameterStarted by Guest_AnbIran_* , 17 Nov 2023 |
|
|
||
Dry Cooler Vs Cooling TowerStarted by Guest_Quimarah_* , 10 Sep 2023 |
|
|
||
Cooling TowerStarted by Guest_panagiotis_* , 04 Sep 2023 |
|
|
||
Overfilling Cooling TowerStarted by Guest_trainspotter124_* , 06 Jun 2023 |
|
|
||
Cooling Tower Sump CapacityStarted by Guest_Ajithkumar02_* , 05 May 2023 |
|
|