21 replies to this topic

[Kat]

Hi all,
Does any one know how to simulate a steam turbine, boiler and a gas turbine (combined cycle, including the gas turbine and a Heat Recovery Steam Generator) in either Hysys or Pro II? Both boiler and gas turbine firing fuel gas.
I would like to simulate a steam system that maximizes the use of fuel gas to produce steam and power, that's why I am looking for how to simulate the boiler and turbine system that I can specify the fuel gas firing.
Which unit operations should I simulate the boiler, steam turbine and gas turbine? In other words, what are the subsystems of the boiler, steam and combined cycle turbine?
Thanks

[AngieD]

Hi Kat!

I am not familiar with Hysys or Pro II. But this webinar may be of help to you:

"Modeling & Simulating Gas Turbine Systems"
http://www.flowmaste..._demo_form.html

They have 4-5 other webinars on gas turbines, as well as one coming up next week on cooling loops:
"Simulating Cooling Systems for Efficient Design"
This educational session will discuss the use of system-level simulation on liquid cooling systems to address key design considerations and common challenges in power generation, plant and process industries.
https://flowmaster.w...92&RT=MiM3&FM=1

Hope this helps! Best of luck!

[Zauberberg]

Turbine as unit operation is readily available in Hysys and PRO/II, and should be used as such. Boiler can be modeled as common exchanger-heater, where external heat duty is equal to the heat supplied by the burning fuel. Anything missing?

[Padmakar Katre]

Dear,
Few years back I tried to model the Gas Turbine with HRSG. Give me your mail id so that I can send you the file.

[Kat]

Dear Padmakar,

thanks alot. My email ID was sent to you.
Hope to receive your file.

Have a nice weekend

Edited by Art Montemayor, 06 April 2011 - 05:05 PM.

[Padmakar Katre]

Dear Kat,

By the time you posted this comment I was in hospital and could not reply you but here is your file. Only thing you need to access this file is to change its extension to .rar from .pdf and extract with winrar extractor (same as .zip). This is the simulation which I did 3 years back. All the necessary back up calculations are done in the spreadsheet. Hope it helps you.

Attached Files

•  GT-60% EFFICIENCY.pdf   138.82KB   1357 downloads

[Kat]

thanks a lot, Padmakar

[srihari]

Dear,
Few years back I tried to model the Gas Turbine with HRSG. Give me your mail id so that I can send you the file.

srihari5043@gmail.com

[Vishnu11]

Dear Mr. Padmakar, I would really appreciate if you could pass me the gas turbine and HRSG you modelled. Thank you.

Regards,
Vishnu
vishnu1988@hotmail.com

[Kat]

Hi Padmakar,

Can you please check and upload the attached file again, because it seems could not be opened properly. I thought because my Hysys license expired so I could not open it but another guy, Vishnu, has the same problem opening the file.

Warm regards,
Kat

Edited by Art Montemayor, 06 April 2011 - 05:07 PM.

[Zauberberg]

The file works OK - just change the extension from PDF to RAR as explained by Padmakar, and use any extractor that is available to you (7-zip is a freeware you can download from the internet).

[alihoteit]

Dear Mr. Padmakar, I would really appreciate if you could pass me the gas turbine and HRSG you modelled. Thank you.

Thank you in advance

Htait

htait_ali@hotmail.com

[samrat]

Dear Kat,

By the time you posted this comment I was in hospital and could not reply you but here is your file. Only thing you need to access this file is to change its extension to .rar from .pdf and extract with winrar extractor (same as .zip). This is the simulation which I did 3 years back. All the necessary back up calculations are done in the spreadsheet. Hope it helps you.

Dear Sir,
Though I changed the extention to *.rar, unable to extract and am getting some error. Do not know why. Attaching for your help please!!
samrat

[MORGEN]

hello,

please could you send me this the gas turbine and HRSG you modelled.

marouenbenakermi@ymail.com

thank you

[samrat]

Dear Shri.Padmakar,
I am able to convert pdf to *.hsc. Thanks once again.
samrat

[RIAD]

Dear Mr. Padmakar, I would really appreciate if you could send me the gas turbine and HRSG you modelled. Thank you.

Thank you in advance


Herouini@gmail.com

[Nippur]

Dear Mr. Padmakar, it would be really helpful to me if you could send me the gas turbine and HRSG you modelled.

jpcavallaro@gmail.com

Thank you.

[Padmakar Katre]

Hi All,
The file is same and is already uploaded in my earlier post. Please download it and follow the instruction given in earlier post. The file still works.
Thanks

[stravenger]

Many thanks..

[stevanusgabs]

Dear kat and all of guys nice to meet you on this group.

 

I would like also to simulation power plants by using hysis..

 

Can you give me guide to do it??

[stevanusgabs]

Dear padmakar,.

 

can you helps me to share your gas turbine and HRSG modelled, i also want to find the idea in your simulation.

 

Warm regrds,

 

Stevanus

[sinha.saurav]

Hi all,

I need help in performing dynamic simulation of steam network of  a refinery with its Captive power plant in HySys like how to incorporate GTs-HRSGs & Aux-boilers in HySys, etc. 

Mr Padmakar, can you please help in downloading the attached pdf of your work as i am still unable to download the same, in the meanwhile would request to please mail me the excel sheet of backup calculations.

 

Thanks.