Jump to content

Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

Design Of High Pressure Feed Water Heater For Power Plant

This topic has been archived. This means that you cannot reply to this topic.
No replies to this topic
Share this topic:
| More

#1 kumars876


    Junior Member

  • Members
  • 15 posts

Posted 11 October 2011 - 08:38 PM

hai to all ,
iam new to htri 6 can any one please do the below feed water heater by htri 6 process and forward me the files
please do this favour by helping me
iam struggling with this problem from 2 weeks

data given
Inlet steam flow rate =5.37 t/hr
Inlet steam flow temperature=359°C
Outlet steam flow temperature=216°C
Shell side mean temperature = 287.5°C
Cooling water flow rate =113.34t/hr
Cooling water inlet flow temperature=175°C
Cooling water outlet flow temperature=200°C
Tube side mean temperature = 187.5°C
shell side steam
tube side water

please any one forward the htri file after doing the problem(if possible send me the hysys file)

my email kumars876@gmail.com

Similar Topics