Hi,
I am to design a contact condenser with the feed gas stream at the top of the column. The feed stream contains HTF (therminol VP-1) and low boilers. The purpose is to condense HTF only to be send to a expansion tank. The low boilers are to be sent to another vessel to be separated farther and removed from the system. For the spray condenser design, do the same vessel design parameters used for flash vessels (Souders-Brown) apply? Are there separate methods for the design of the vessel alone, and the design of the spray nozzles?
I have the inlet conditions of the vapor stream only (flow rate, T and P).
Thank you so much in advanced for your help!
|
Design Of Direct Contact Condenser ( With Spray Header Nozzles)
Started by anj3, Oct 27 2011 09:30 AM
condenser spray nozzles direct contact condenser
No replies to this topic
Share this topic:
#1
Posted 27 October 2011 - 09:30 AM
Similar Topics
Answered
Design And Fabrication Of Reflux DrumStarted by Guest_Femi_* , 22 Apr 2024 |
|
|
||
Jt Based Hcdp Design V/s Mechanical Refrigeration Hcdp Unit.Started by Guest_BabRafiq1_* , 19 Apr 2024 |
|
|
||
Rupture Disc DesignStarted by Guest_chaupradip_* , 13 Apr 2024 |
|
|
||
Falling Film Reactor Design CalculationStarted by Guest_Emranm02_* , 07 Apr 2024 |
|
|
||
Hot Oil Loop / Heating Medium DesignStarted by Guest_Lyne_* , 30 Mar 2024 |
|
|