hi .. I have to design a washer cooler to cool and and wash ash particles of size -200mesh .. the gas is a minture of CO 55% H2 30% CO10% rest is N2 ,H2S .... gas enters the washer cooler at 350F and leaves at 100F and water at ambient condition is to be used ... about 90% of ash particles are removed ... since in this case heat transfer is the controlling step so i have decided to design it on the heat trasfer base .. but i am facing problems in desiging .. one thing is that i am able to find humidity chart for this type of a gas and if i use air humidity chart the wet bulb gas outlet temp falls below wet bulb temp ... please can anyone help me in this regard and give some hint on what type of scrubber i use and how to proceed the design ..
reply and thanks
|
Washer Cooler Design
Started by aliadnan, Nov 14 2005 11:41 PM
No replies to this topic
Share this topic:
#1
Posted 14 November 2005 - 11:41 PM
Similar Topics
Design And Fabrication Of Reflux DrumStarted by Guest_Femi_* , 22 Apr 2024 |
|
|
||
Jt Based Hcdp Design V/s Mechanical Refrigeration Hcdp Unit.Started by Guest_BabRafiq1_* , 19 Apr 2024 |
|
|
||
Rupture Disc DesignStarted by Guest_chaupradip_* , 13 Apr 2024 |
|
|
||
Falling Film Reactor Design CalculationStarted by Guest_Emranm02_* , 07 Apr 2024 |
|
|
||
Hot Oil Loop / Heating Medium DesignStarted by Guest_Lyne_* , 30 Mar 2024 |
|
|