Dear Ankur,
Thank you for the PDF file. I read it and it is mentioned that the calculation is valid when there is no non-condensable in storage tank.
I did the simulation in HYSYS already. I wanted to check if the result from HYSYS is correct or not. The worst case I have is pump-in scenario.
I assumed;
- N2 stream: actual flow rate the same is pump-in flow rate;
- Liquid stream: same as pump-in flow rate;
- both streams connected to a flash vessel
- there is no heating/cooling involved and temperature of both streams is ambient
When I check the vapor stream, I then I will have the composition and vapor physical properties. It is the only way that I can think about to simulate it in HYSYS.
Cheers,
ARM
Edited by ARM, 11 March 2013 - 04:43 AM.