1 reply to this topic

[HATTAN]

Gents,

 

Greetings to all of you,

 

I would like to hear from all of you, What are the things we shall considered during design PID in the PDP stage, such as: single line PSV, venting, IV, CSO, CSC, XV, ...etc.

 

and what is the common mistakes you found in the PID and you would fix it. EX: putting Pump with one isolation valve in the suction line only, so during maintenance of the pump if this Isolation valve is passing you cannot isolate this pump for maintenance..... and similar cases....

 

looking forward to all of you comments.

 

BR,

[Saml]

The most common mistake is asking questions that cannot be answered