2 replies to this topic

[Herbid]

Dear all

 

I want to loading about 14 ton of CMS (Carbon Molecular Sieve) into a PSA Nitrogen Producer tank.

The tank is 5 meter tall with 2 m in diameter.

What is the best, simplest and fastest method to load the pellet of CMS into that big tank?

 

I consider this mortar screw pump and connect it to a long / extended hose to reach the top of the tank.

 

http://www.penobet.r...d/sosna7pro.jpg

 

Within removing the agitator inside the hopper and used VFD/VSD to slow down the motor speed of Screw or Pump mechanism, will the screw still crunch or crush the CMS pellet?

 

Sorry for my English.

 

Best Regards

[Bobby Strain]

One usually loads material with a sock. You should consult your supplier.

 

Bobby

[Neelakantan]

how you got the pellets? barrels or sacks? why not simple exercise of manual loading; rig to lift the barrel or sack and fill from the top man-hole! using a cloth chute and pull the chute as the bed height increases?; we have done molecular sieve filling from barrels into a larger dryers (twin dryers in fact) just in 12 hours overnight!

 

regards

neelakantan