2 replies to this topic

[anand1194]

There is a vessel (5 m^3) in which liquid (say water) is at 215 barg and 350 C. For a blow down of a particular volume of liquid (say 150 L) through a valve (size 1 inch), I have to find out blow down time. The pressure downstream of the valve is 1 bar and thus flashing would occur. How should i proceed with calculation? Vessel is isolated in upstream side. 

[breizh]

https://www.vanec.co...-silencers.html

 

hi ,

take a look , hope this is going to help you.

Breizh

[SyedAhmed]

Please read this standard. This can help you.

 

NORSOK standard P-001