|
Applicable Standards For Process Engineer
#1
Posted 26 March 2019 - 09:16 AM
Hydraulics: API 14E, SHELL DEP 31.38.01.11-GEN, 31.22.05.11-GEN, 80.45.10.10-GEN, NORSOK P001, IPS-E-PR-440
(LUDWIG VOL-1, EXXON PROCESS DESIGN COURSE VIL-1)
Control Valve: ISA 75, SHELL DEP 32.36.01.17
(MASONEILAN CONTROL VALVE SIZING HANDBOOK, FISHER CONTROL VALVE HAND BOOK, CONTROL VALVE BASICS:SIZING AND SEKECTION COURSE NI. M04-034 OF CED ENGINEERING)
SAFETY VALVE: API 520, API 521, API 2000, ASME VIII, SHELL DEP 80.45.10.10-GEN
(PRV ENGINERING HAND BOOK-CROSPHY)
API STANDARDS FOR PUMP, COMPRESSOR, SEPARATOR
THAMBAS (A) SUBRAMANIYAN
#2
Posted 28 March 2019 - 08:15 AM
I'm not sure purely reading lengthy, wordy standards is the best way to advance oneself in process engineering.
I would think learning more about industrial processes would be more helpful.
#3
Posted 01 April 2019 - 08:45 AM
I hope standards are nothing but recorded document of accumulated knowledge over the year.
S.Subramaniyan
#4
Posted 02 April 2019 - 03:51 AM
Hi Sabachi,
I think you are junior engineer or a one who has just started in this industry.
Just take one equipment / system that has been assigned to you and refer the applicable standards/guidelines. That will help.
There are 'n' number of standards/company standards / statutory guidelines / articles that you can find on a single equipment / system.
#5
Posted 25 April 2019 - 06:03 AM
You can also refer to standards for Hazardous Areas (IEC 60079 series), which are essential for any process engineer to know who works with hydrocarbons, flammable materials, volatiles, etc. Also study IEC 61508 and IEC 61511 (Functional Safety For Process Industry). However, many of the standards are not easy reads, so it is better that you enroll into some online learning courses to get some basic knowledge about the subject, after which the standards may seem a bit easier to read and absorb. You can find some good free online courses at htpps://prettygoodcourses.com on topics such as Hydrogen Sulfide, Hazardous Areas, etc. The paid courses will enable you earn certificates and badges that you can display on your LinkedIn profile and other places online.
#6
Posted 30 April 2019 - 06:50 AM
Hi Sabachi,
I think you are junior engineer or a one who has just started in this industry.
Just take one equipment / system that has been assigned to you and refer the applicable standards/guidelines. That will help.
There are 'n' number of standards/company standards / statutory guidelines / articles that you can find on a single equipment / system.
#7
Posted 30 April 2019 - 06:51 AM
Hi Sabachi,
I think you are junior engineer or a one who has just started in this industry.
Just take one equipment / system that has been assigned to you and refer the applicable standards/guidelines. That will help.
There are 'n' number of standards/company standards / statutory guidelines / articles that you can find on a single equipment / system.
Thanks for your guidance
#8
Posted 30 April 2019 - 06:53 AM
You can also refer to standards for Hazardous Areas (IEC 60079 series), which are essential for any process engineer to know who works with hydrocarbons, flammable materials, volatiles, etc. Also study IEC 61508 and IEC 61511 (Functional Safety For Process Industry). However, many of the standards are not easy reads, so it is better that you enroll into some online learning courses to get some basic knowledge about the subject, after which the standards may seem a bit easier to read and absorb. You can find some good free online courses at htpps://prettygoodcourses.com on topics such as Hydrogen Sulfide, Hazardous Areas, etc. The paid courses will enable you earn certificates and badges that you can display on your LinkedIn profile and other places online.
Yes safety related guidelines are helful.
Thanks for spending some time for me.
Similar Topics
Ammonium Sulfate Process SimulationStarted by Guest_amir55261_* , 06 Apr 2024 |
|
|
||
Mtbe Process Flow Diagram Master Thesis.Started by Guest_sayoub_* , 15 Feb 2024 |
|
|
||
Let Down Vessel In Methanol ProcessStarted by Guest_Manue_* , 21 Mar 2024 |
|
|
||
Electrical Inputs From ProcessStarted by Guest_Chari_* , 06 Feb 2024 |
|
|
||
Recycling Of Working Solution In The Anthraquinone ProcessStarted by Guest_Has2riasat_* , 01 Feb 2024 |
|
|