The flow orifice of process air compressor discharge in our plant is compensated for discharge pressure and but the uncompensated flow is used in controller of the blow off valve of the compressor.
But the process air is heated through a fired heater and the flow at the outlet is pressure and temperature compensated and the compensated flow is used for logic in air flow low trip.
So on what logic do we decide whether the compensated or uncompensated flow is to be used for trip logic
|
0
Flow Compensation In Trip Logic
Started by muthukmaar, Sep 17 2019 11:45 AM
1 reply to this topic
Share this topic:
#1
Posted 17 September 2019 - 11:45 AM
#2
Posted 17 September 2019 - 05:34 PM
You should really include a small sketch in order to explain more clearly what this process looks like and what the trip logic is supposed to do
See also point 4. of https://www.cheresou...ting-questions/
Similar Topics
Flow Switch High RangeStarted by Guest_Lyne_* , 11 Apr 2024 |
|
|
||
Kettle Reboiler Flow FractionsStarted by Guest_Lyne_* , 31 Mar 2024 |
|
|
||
Mtbe Process Flow Diagram Master Thesis.Started by Guest_sayoub_* , 15 Feb 2024 |
|
|
||
Duplication Of Psv And Flow Rate For Exchanger Tube Rupture ScenarioStarted by Guest_Platonicus_* , 11 Mar 2024 |
|
|
||
Firewater Theoretical Vs Actual FlowStarted by Guest_stu_* , 25 Feb 2024 |
|
|